0086-571-88220653 hzpt@hzpt.com
0アイテム
ページを選択

WPシリーズウォームギアボックス

WP series reducer, the worm is made of 45 # steel through heat treatment processing, and the worm gear is cast with tin bronze. It has good wear resistance, especially outstanding in bearing capacity, and is mainly applicable to the reduction drive of various mechanical equipment such as plastic, metallurgy, beverage, mining, hoisting and transportation, and chemical construction.

Cast iron worm gearbox–Inch Dimension

 

シリーズUY
シリーズQY
Series WY
シリーズWDY
シリーズDSY
Series WDKY
シリーズWOY
Series WDKOY
シリーズAY

Cast iron worm gearbox list–Metric Dimension

Please confirm the following parameters before purchasing

  1.  Please confirm the model and size you need;
  2. Please confirm the speed ratio of the reducer;
  3.  Please confirm the axial direction.

Single speed reducer

ratio: 1/5-1/60

WPA WPDA WPKA WPDKA
WPS WPDS WPKS WPDKS
WPO WPDO WPZ WPDZ
WPX WPDX WPKZ WPDKZ

倍速減速機

ratio: 1/100-1/3600

WPEA WPEDA WPEKA WPEDKA WPES
WPEDS WPEKS WPEDKS WPEO WPEDO
WPWEDO WPWEO WPEX WPEDX WPWEKO
WPWEDKO WPWE WPWED WPWEK WPWEDK

 

Universal speed reducer

ratio: 1/5-1/60

WPW WPWD WPWK WPWDK WPWA
WPWDA WPWKA WPWDKA WPWS WPWDS
WPWKS WPWDKS WPWO WPWDO WPWKO
WPWDKO WPWX WPWDX WPWKT WPWDKT
WPWT WPWDT WPWKV WPWDKV WPWV
WPWDV

Features of cast iron worm gearbox

1. Stable transmission, low vibration, impact and noise, large reduction ratio, wide versatility, and can be used with various mechanical equipment.
2. Large transmission ratio can be obtained by single-stage transmission, and the structure is compact. Most types of reducers have good self-locking performance, and braking devices can be saved for mechanical equipment with braking requirements.
3. The meshing friction loss between the worm thread and the tooth surface of the ウォームギア is large, so the transmission efficiency is lower than that of the gear, and it is easy to heat up and the temperature is higher.
4。 潤滑および冷却のより高い要件。
5. Good compatibility, worm gears and worms are manufactured according to national standards, and ベアリング, oil seals, etc. are all standard parts.

Working conditions of cast iron worm gearbox

1. ウォームギア減速機のウォーム速度は 1500r/min を超えてはなりません。
2. The working environment temperature is – 40 ℃ -+40 ℃. When the working environment temperature is lower than 0 ℃, the lubricating oil is heated to above 0 ℃ before starting. When the working environment temperature is higher than 40 ℃, cooling measures are taken.
3.ウォームギア減速機の入口シャフトは、前後に回転できます。
◆ Precautions:
1. Worm gear shaft cannot be used as input shaft.
2. 工場出荷時に機械に燃料が補給されていません。 機械油を十分に補給してから運転してください。
3.マッチング モーター (i.e. power) shall not exceed the value specified on the nameplate.
4. シャフトの方向を変更したい場合は、下部シャフトの 180 つのエンド カバーを取り外し、ウォーム シャフトを取り出して XNUMX 度調整します。ロードします。 XNUMX 番目のシャフトをゆっくりと駆動してかみ合わせることができます。